Renovation crane rail construction at Smals, Cuijk

Bemo Rail has commissioned by KenzFigee renewed the railway structures of the crane at Smals in Cuijk. The work consisted of providing and replacing the katrail and the supply and replacement of the turntable.

The last mentioned was quite a challenge. The rails of the turntable was replaced without the crane have been taken off. The circular segments are at Kersten Europe exactly the right size and fitted exactly. The work was performed in the carnival weekend, so that the North Brabant end user so had the least affected by the stoppage of the crane.


Katrail en draaikrans vervangen bij Smals, Cuijk Katrail en draaikrans vervangen bij Smals, Cuijk


Project Kai Tak Cruise Terminal completed!

Bemo Rail has the complete project at Kai Tak Cruise Terminal in Hong Kong successfully! Kai Tak Cruise Terminal is a gate to Hong Kong and from Hong Kong to Asia. The cruise terminal offers efficient service to board and disembarkation of cruise passengers and also there is a wonderful roof terrace where visitors can dine.

Bemo Rail has crane track A75 fitted with an adjustable clip continuously supported . The rails are welded by a puddle arc process. After the entire crane track was ready this was overseen by Bemo Rail filled with asphalt gutter filling. There can be driven on safely over the gutter with heavy equipment.


Gootvulling Kai Tak Cruise Terminal - Hong Kong



Kraanbaan op beton, continu ondersteund - Kai Tak Cruise Terminal Hong Kong

New company buses

Today there are two brand new Mercedes ‘Blue Efficiency’ company buses arrived.
We have chosen for buses with very low emissions. Both buses are again covered with the characteristic corporate identity.

Nieuwe bedrijfsbussen Nieuwe bedrijfsbussen


APM Terminals Maasvlakte 2 – completed

Bemo Rail has completed its work at the end of November: the new APM Terminals Maasvlakte 2. The first cranes are already built.

Commissioned by Dura Vermeer Railinfra Bemo Rail mounted 2×475 meter quay rail A150 for the Barge Terminal, 2×975 meter quay rail A150 assembled for the Deepsea quay and a total of 1274 puddle arc welds made in crane rail A150 and MRS87A.


APM Maasvlakte2 APM Maasvlakte2 APM Maasvlakte2